Milwaukee 2554-20 M12 FUEL Stubby 3/8″ Impact Wrench

Milwaukee M12 12V battery platform

Quick Specs

Battery PlatformMilwaukee M12 12V battery platform
Max Torque250 ft-lbs
Speed3,200 RPM
Length4.8 inches

What Battery Does the Milwaukee 2554-20 Use?

The Milwaukee 2554-20 M12 FUEL Stubby 3/8″ Impact Wrench runs on the Milwaukee M12 12V battery platform. Any Milwaukee M12 REDLITHIUM battery will power this tool. Note that M12 batteries are NOT interchangeable with M18 batteries — they are a separate, smaller platform.

About the Milwaukee 2554-20

The Milwaukee 2554-20 is the most compact cordless impact wrench available, measuring just 4.8 inches in length. Despite its small size, it delivers up to 250 ft-lbs of fastening torque and 3,200 RPM. The POWERSTATE brushless motor and four-mode DRIVE CONTROL make it ideal for automotive underhood work, tight-space fastening, and maintenance tasks where full-size impact wrenches simply won’t fit.

Compatible Batteries

Battery ModelCapacityWeightBest For
48-11-24202.0Ah0.53 lbUltra-compact, tight spaces
48-11-24404.0Ah0.78 lbBest balance of runtime and size
48-11-24606.0Ah1.02 lbMaximum runtime for extended work

Recommended Cutting Discs

As an Amazon Associate we earn from qualifying purchases. Check fitment & current price on Amazon.

SATC
SATC 115mm Metal Cutting Discs for Angle Grinder (20-Pack)
Check Price on Amazon
SATC
SATC 115mm Metal Cutting Discs for Angle Grinder (50-Pack)
Check Price on Amazon
Bosch
Bosch EXPERT Carbide Multi Wheel Cutting Disc 115mm
Check Price on Amazon

Recommended Battery

For the 2554-20, the 48-11-2440 (4.0Ah) is the ideal choice. It provides excellent runtime while keeping the tool compact — which is the entire point of choosing an M12 stubby impact wrench. The 4.0Ah pack doubles the runtime of the 2.0Ah while adding less than half a pound of weight.

Minimum Battery

The 48-11-2420 (2.0Ah) compact battery is perfectly viable for the 2554-20. For quick automotive tasks like removing a few fasteners or swapping brake components, the 2.0Ah pack keeps the tool at its lightest and most manoeuvrable. Keep a spare charged if you’re doing an extended job.

Battery Compatibility Notes

  • All M12 REDLITHIUM batteries are compatible with every M12 tool
  • M12 batteries are NOT compatible with M18 tools — they are physically different and not interchangeable
  • M12 High Output batteries deliver increased power for demanding tools like impact wrenches
  • The compact size of M12 batteries is a key advantage for the stubby impact wrench — it keeps overall tool length minimal

Related Resources

Battery sizing, runtime & troubleshooting

Recommended pack: This compact wrench (~250 ft-lb class) pulls hard current in bursts. A 4.0Ah XC pack delivers more consistent torque and far more fasteners per charge than a CP 2.0Ah.

Compatibility caveats: Fits all M12 packs; capacity is the variable. This model is discontinued by Milwaukee (succeeded by the 2562-20) but remains a genuine, supported tool. Not compatible with M18.

If it won’t start or cuts out: Cutting out mid-fastener almost always means the pack is too small or too low — a compact 2.0Ah can hit its current limit on stubborn bolts. Move to a 4.0Ah before assuming a fault.

Runtime: No official figure published; expect roughly double the fasteners from a 4.0Ah versus a 2.0Ah pack.

Versus the adjacent model: Versus the 2503-20 drill on the same battery, the impact wrench is the higher-draw partner — prioritise your larger M12 pack here.

Where to Buy

Ready to add the Milwaukee 2554-20 to your toolkit? Check current prices and availability:

Check Price on Amazon

As an Amazon Associate, we may earn from qualifying purchases. This doesn’t affect the price you pay.

Related Compatibility Guides