Most Makita cordless circular saws take one of two blade sizes: 165mm with a 20mm bore (for handheld models) or 190mm with a 30mm bore (for larger saws like the twin-battery DHS710Z). This guide tells you exactly which blade fits your model and recommends the best blades for each application.
Makita Cordless Circular Saw Models & Blade Specs
| Model | Blade Diameter | Bore Size | Battery Platform |
|---|---|---|---|
| DHS680Z | 165mm | 20mm | 18V LXT |
| DHS710Z | 190mm | 30mm | Twin 18V LXT (36V) |
| DCS7301N1 | 165mm | 20mm | 18V LXT |
The DHS680Z (18V handheld) is Makita’s most common cordless circular saw in the UK. Both blade sizes are readily available from UK suppliers.
Best Circular Saw Blades for Makita Saws
Here are tested recommendations for common jobs:
Best General Purpose Blade: Makita B-09298 (165mm 40T)
If you own a DHS680Z and only buy one blade, this is it. A 40-tooth thin kerf in Makita’s OEM quality. Works well on softwood, hardwood, and plywood with a decent finish. Fast cuts for general carpentry.
Buy Makita B-09298 on Amazon UK
Best Fine Finish Blade: 60-Tooth Thin Kerf (165mm, 20mm bore)
For finish work, joinery, or melamine cutting. A 60-tooth blade removes less material (thin kerf) so it leaves a very clean edge. Buy from Bosch Optiline, Diablo, or Trend ranges.
Buy 60T thin kerf circular saw blades on Amazon UK
Best Framing Blade: 24-Tooth Coarse (165mm, 20mm bore)
For fast ripping and rough framing cuts. A coarse 24-tooth blade cuts faster and handles knots better than finer blades. Choose a standard (not thin) kerf — it’s more durable for rough site work.
Buy 24T framing blades on Amazon UK
For the DHS710Z (190mm):
The larger DHS710Z twin-battery saw takes 190mm diameter blades with a 30mm bore. These are less common in the market than 165mm, but available from major suppliers. A 40-tooth option from Makita, Bosch, or Dewalt is your best bet.
Buy 190mm circular saw blades on Amazon UK
Makita vs Third-Party Blades
Makita OEM blades (the B-09298 and similar) are solid mid-range performers. They’re reliable but not the sharpest option available. For tougher applications, Bosch Optiline and Diablo blades often outperform Makita’s own range and cost less. For budget work, Trend is a UK favourite that offers good value.
Blade Care & Storage
Keep blades dry and store them flat or in a blade case to avoid warping. Check that your blade is clean before installing — even a small chip of old wood can cause vibration. For extended storage (more than a few weeks), apply a light coat of oil to the teeth to prevent rust on exposed carbide edges.
Related Pages
See the full circular saw blade compatibility guide for bore size reduction information and cross-brand compatibility. For battery and charger compatibility, see the Makita 18V LXT platform page.
Frequently Asked Questions
Can I use a 190mm blade in my DHS680Z?
No. The DHS680Z is rated for 165mm blades only. A larger blade would be too heavy for the motor and could cause binding or kickback.
What bore size do Makita DHS680Z blades use?
20mm bore. Make sure any blade you buy is explicitly 165mm diameter × 20mm bore.
Are Makita blades compatible with DeWalt or Milwaukee saws?
Not always. Blade diameter must match your saw’s rating (165mm, 190mm, etc.) and bore must match the arbor size (20mm, 30mm, etc.). A Makita blade that fits another brand’s saw does so only if both specs align. Check the specs on the blade and your saw’s manual.
What’s the difference between Makita B-09298 and other 40T blades?
Not much. Makita’s own blade is reliable and kerf-friendly (thin kerf), but other brands like Bosch and Diablo offer similar performance at comparable prices. Choose based on availability and budget.