Ryobi Angle Grinder Disc Compatibility (2026) — What Fits Every Model

Advertising disclosure: this page contains affiliate links to Amazon and other retailers. If you buy through them we earn a commission at no extra cost to you; this does not change what we publish. As an Amazon Associate we earn from qualifying purchases. Any prices mentioned are approximate UK guide prices at the time of writing, not live retailer prices — always check the current price on the retailer’s site. Compatibility information is compiled from manufacturer specifications and is not physically tested by us — see our editorial policy.

Ryobi Angle Grinder Disc Compatibility (2026)

Complete guide to finding the right discs for every Ryobi grinder model

Published: 26 March 2026 | Updated: 26 March 2026 | Reading time: 6 minutes

Ryobi has earned a solid reputation in the UK as the budget-conscious DIY brand. Their angle grinders—particularly the ONE+18V cordless range—deliver impressive value for homeowners and light-duty users. But here’s the crucial point: Ryobi grinders use the same standard 22.23mm bore as professional brands like Bosch and Makita. This means you have complete flexibility in disc selection.

This guide covers every current Ryobi angle grinder model and shows you how to find compatible discs at the best price.

Quick Compatibility Table: Ryobi Angle Grinder Models (2026)

ModelTypeDisc SizeBore DiameterMax RPMBattery SystemPower
R18AG-0Cordless115mm22.23mm7,500ONE+18V18V
RAG18125-0Cordless125mm22.23mm9,000ONE+18V18V
RAG800-125G (Ryobi Germany; no UK page)Corded125mm22.23mm12,000Mains (230V)800W

Current models: Ryobi UK now lists the RAG18115 (115mm) and RAG18125 (125mm), both rated at 9,000 RPM, alongside the older R18AG-0. Disc sizes and the 22.23mm bore are the same, so the disc advice below still applies.

FREE PDF DOWNLOAD

Get the free Angle Grinder Disc & Safety Sheet (PDF)

The right disc for every job, plus the RPM checks that keep you safe.

Angle Grinder Disc & Safety Sheet — Free PDF

Key note: The Ryobi grinders on this page have an M14 spindle and take discs with the standard 22.23mm bore, so third-party discs of the right size and speed rating fit.

ONE+ 18V Cordless Models

R18AG-0 (115mm Entry-Level)

Disc size: 115mm | Bore: 22.23mm | RPM: 7,500 | Battery: ONE+18V

A 115mm ONE+ cordless grinder suited to cutting thin steel, rebar and light grinding. The 115mm disc is perfectly suited to DIY work and occasional professional light-duty tasks.

What it’s good for:

  • Cutting angle iron and rebar for garden projects
  • Cutting masonry and concrete (with diamond disc)
  • Light rust removal and finishing
  • One-off metalworking tasks

Common cutting discs that fit: Any 115mm disc with 22.23mm bore (Ryobi-branded, Silverline, Faithfull, Makita, DeWalt, etc.).

RAG18125-0 (125mm)

Disc size: 125mm | Bore: 22.23mm | RPM: 9,000 | Battery: ONE+18V

Ryobi UK’s current 125mm ONE+ grinder (9,000 RPM). Earlier versions of this guide listed an “R18AG7-0”, which Ryobi UK no longer lists (Ryobi’s fact sheet gives it as a 125mm brushless grinder at 11,000 rpm). Ryobi also lists a brushless ONE+ HP 125mm grinder, the RAG18X125-0 (9,000 RPM).

What it’s good for:

  • More aggressive cutting than the 115mm
  • Thicker steel and longer cuts
  • Regular DIY metalworking
  • Flap disc finishing work

Common cutting discs that fit: Any 125mm disc with 22.23mm bore.

Ryobi ONE+18V Battery Ecosystem

Both cordless models run on Ryobi’s ONE+18V batteries. This is excellent value if you already own other ONE+ tools (drills, saws, impact drivers, etc.)—you’re leveraging existing batteries and chargers. Ryobi ONE+18V batteries come in 1.3Ah, 2.0Ah, 3.0Ah, and 5.0Ah capacities.

Runtime tips: Ryobi UK says that with a 5.0Ah battery the R18AG-0 can make up to 57 cuts of 13mm threaded bar on a single charge, and lists 17, 21 and 46 cuts with 2.0, 2.5 and 4.0Ah packs.

Corded Grinder Models

RAG800-125G (125mm, 800W)

Disc size: 125mm | Bore: 22.23mm | RPM: 12,000 | Power: 800W

A corded option. We found it on Ryobi’s German site (de.ryobitools.eu) but not on Ryobi UK; a 115mm “RAG800-115G” listed in earlier versions of this guide does not appear on Ryobi UK (it is listed on Ryobi’s Russian site). The 800W motor is modest but adequate for light cutting and grinding. No batteries to charge means unlimited runtime as long as mains power is available. Good for occasional users who prefer corded reliability.

Common discs: Any 125mm disc with a 22.23mm bore rated for at least 12,000 RPM.

Ryobi vs Professional Brands: An Honest Comparison

Here’s what you need to understand about Ryobi grinders:

Flap Disc 115mm for Angle Grinder

Strengths

  • Cost: Significantly cheaper than Bosch Professional or Makita. A Ryobi R18AG-0 costs roughly half the price of a comparable Bosch GWS18V-10.
  • ONE+ ecosystem: If you own other Ryobi ONE+ tools, the grinder integrates seamlessly. You’re not locked into proprietary batteries.
  • Reliability for DIY: Ryobi grinders work perfectly for DIY projects and light-duty use. They won’t fail on you during a garden project.
  • Availability: Widely stocked in UK retail. Easy to find parts, batteries, and accessories.

Limitations

  • Duty cycle: Ryobi’s ONE+ range is aimed mainly at DIY users; check the manual for your model’s limits.
  • No X-LOCK: The Ryobi grinders on this page use a conventional M14 spindle, so they take standard 22.23mm-bore discs (Bosch says most X-LOCK discs also fit conventional grinders).

The Bottom Line

Buy Ryobi if you’re a homeowner, DIY enthusiast, or occasional user. The value for cost is unbeatable. Buy professional brands (Bosch, Makita, DeWalt) if you use the grinder multiple times per week or for sustained job-site work. Ryobi grinders are not inferior—they’re simply not engineered for professional duty cycles.

Best Budget Discs for Ryobi Grinders

Because Ryobi attracts cost-conscious buyers, here are the best value discs that work with every Ryobi model:

Best Budget Cutting Discs

Silverline 10-Pack Cutting Discs (115mm or 125mm)
View on Amazon
Price: ~£8–£10 | Per disc: ~£0.80–£1.00
Silverline cuts cleanly, lasts reasonably long, and won’t break the bank. Available in both 115mm and 125mm.

Faithfull Cutting Discs (115mm or 125mm, 5-pack)
View on Amazon
Price: ~£5–£7 | Per disc: ~£1.00–£1.40
British brand with solid reliability. Slightly more expensive per disc than Silverline, but many users report longer life. Good if you want a middle ground between Silverline and premium brands.

Home.Smart Mixed Pack (115mm or 125mm, 10-pack)
View on Amazon
Price: ~£12–£15 | Per disc: ~£1.20–£1.50
Includes multiple grit sizes (cutting, grinding, flap). If you do mixed work (cutting and finishing), this saves buying separate packs. Good value if you want variety without overspending.

Best Flap Discs for Finishing

Silverline Flap Disc 40-Grit (125mm)
View on Amazon
Price: ~£1.50 per disc
A step up from hard grinding wheels. Flap discs deliver a better surface finish and last longer. 40-grit is coarse (good for weld grinding); 80-grit is finer (finishing work).

Makita Flap Disc Mixed Pack (125mm)
View on Amazon
Price: ~£12–£16 for mixed pack | Per disc: ~£1.20–£1.60
Comes with 60 and 120-grit discs. Professional brand at reasonable cost. Superior finish quality compared to Silverline.

Best for Concrete & Masonry Work

Silverline Diamond Cutting Disc (115mm or 125mm)
View on Amazon
Price: ~£8–£12 per disc
If you’re cutting tile, stone, or concrete, a diamond blade is essential. Use the 115mm size on 115mm grinders such as the R18AG-0 and the 125mm size on 125mm grinders such as the RAG18125-0.

Makita Diamond Disc (125mm, segmented)
View on Amazon
Price: ~£10–£14 per disc
Professional-grade diamond blade. Cuts masonry cleaner and faster than budget alternatives. Longer life justifies the higher cost for frequent users.

Best Wire Wheels for Rust Removal

Silverline Knotted Wire Wheel (115mm or 125mm)
View on Amazon
Price: ~£3–£5
Aggressive rust and paint removal. Knotted design resists snarling. Affordable and effective for renovation projects.

Makita Twisted Wire Wheel (125mm)
View on Amazon
Price: ~£5–£8
Finer wire for more delicate surfaces. Better finish than knotted wheels; less aggressive, so less risk of damage to base metal.

Money-Saving Tip: Buy in Bulk

Silverline sells 10-packs of cutting discs for around £8–£10. That works out to roughly £0.80–£1.00 per disc—cheaper than buying single discs. If you know you’ll be cutting regularly, bulk packs are the best value.

Similarly, Home.Smart’s mixed packs include cutting, grinding, and flap discs, giving you versatility without buying five separate packs.

Watch: Video Guide

Frequently Asked Questions

Will a professional brand disc (Makita, Bosch, DeWalt) fit my Ryobi grinder?

Yes. Standard discs from these brands have a 22.23mm bore, so a Makita cutting disc of the right size and speed rating fits a Ryobi R18AG-0. Bosch says most X-LOCK discs also fit conventional M14 grinders, but conventional discs don’t fit X-LOCK grinders.

Can I use a 230mm disc on my Ryobi 115mm grinder?

No. Disc size is tied to the grinder’s spindle and guard design. You must use the correct size: 115mm discs for 115mm grinders, 125mm for 125mm grinders. Using an oversized disc is dangerous and will not fit the tool.

Is a 125mm Ryobi grinder worth the upgrade over the R18AG-0 (115mm)?

If you only cut occasionally, the R18AG-0 is fine. If you use the grinder regularly or cut thicker steel, a 125mm model such as the RAG18125-0 gives a larger disc; Ryobi’s RAG18X125-0 is its brushless 125mm option.

Can I use Ryobi ONE+18V batteries from my drill on the grinder?

Yes. The R18AG-0 and RAG18125-0 both use standard Ryobi ONE+18V batteries. Any ONE+18V battery (1.3Ah, 2.0Ah, 3.0Ah, 5.0Ah) will work in the grinder. Larger capacity batteries give longer runtime.

What’s the best budget cutting disc for a Ryobi grinder?

Silverline 10-packs at ~£8–£10. That’s roughly 80p–£1 per disc. Consistent quality, reliable cutting, and excellent value. If you want slightly longer life, Faithfull is a step up but costs more.

Are Ryobi grinders suitable for professional/job-site work?

No. Ryobi grinders are engineered for DIY and occasional homeowner use. We have no Ryobi duty-cycle rating for these grinders. If you use a grinder multiple times per week or on job sites, invest in Bosch Professional, Makita, or DeWalt.

Do Ryobi make their own angle grinder discs?

We have not confirmed who makes Ryobi-branded discs. Either way, any disc of the right size and speed rating with a 22.23mm bore fits.



Summary: Budget Grinding Made Simple

Ryobi angle grinders deliver exceptional value for DIY users and homeowners. Both the R18AG-0 and RAG18125-0 cordless models take standard 22.23mm-bore discs—meaning you have complete flexibility to choose budget-friendly options like Silverline or professional-grade discs like Makita, depending on your budget and project demands.

Quick buying guide:

  • Occasional DIY cutting: R18AG-0 (115mm) + Silverline 10-pack cutting discs (~£8).
  • Regular DIY work: RAG18125-0 (125mm) + Home.Smart mixed pack for versatility.
  • Concrete/masonry: Add a Silverline diamond disc (~£8–£12).
  • Rust removal: Silverline knotted wire wheel (~£3–£5).

Total cost for a complete Ryobi grinder setup with discs: ~£100–£150. Professional equivalent (Bosch + premium discs): ~£250–£350.

Disclaimer: This content includes Amazon affiliate links. If you purchase through these links, we receive a small commission at no extra cost to you. This helps us maintain and expand this compatibility guide.

Last updated: 26 March 2026

Affiliate tag: toolcompatibi-21

How we compile this guide

We cross-reference compatibility details against manufacturer specifications where available, official tool manuals, and the physical standards that govern fitment (bore sizes, arbor diameters, voltage platforms, connector types). We prioritise primary sources over retailer listings, flag anything we can’t confirm, and re-verify the data on a regular cycle. Where we give a buying recommendation, we tell you the reasoning — not just the link. More on our method →