DeWalt Angle Grinder Disc Compatibility (2026) — What Fits Every Model
Author: Tool Compatibility Team | Published: March 2026 | Updated: March 2026
DeWalt angle grinders range from compact 18V XR cordless models to the powerful 54V FlexVolt cordless and traditional corded grinders. Each platform—18V, 54V, and corded—uses different disc sizes and specifications. This guide covers every DeWalt grinder model and shows you exactly which discs fit, plus our top recommendations for cutting and grinding across all sizes.
Quick DeWalt Angle Grinder Disc Compatibility Table
| Model | Disc Size | Bore Diameter | Max RPM | Type |
|---|---|---|---|---|
| DCG405N | 125mm | 22.23mm (M14 spindle) | 9,000 RPM | 18V XR Cordless |
| DCG412N | 125mm | 22.23mm (M14 spindle) | 8,000 RPM | 18V XR Cordless (older model) |
| DCG418NT | 125mm | 22.23mm (M14 spindle) | 9,000 RPM | 54V FlexVolt Cordless |
| DCG460N | 230mm | 22.23mm (spindle not stated on DeWalt UK page) | 6,000 RPM | 54V FlexVolt Cordless |
| DWE4206 | 115mm | 22.23mm (M14 spindle) | 11,000 RPM (fixed speed) | Corded (1,010W) |
| DWE4257 | 125mm | 22.23mm (M14 spindle) | 2,800–10,000 RPM (variable) | Corded (1500W) |
Get the free Angle Grinder Disc & Safety Sheet (PDF)
The right disc for every job, plus the RPM checks that keep you safe.
Key point: The DeWalt angle grinders on this page take discs with a 22.23mm bore; DeWalt lists an M14 spindle for the UK/EU models where it states the spindle. This makes compatibility simple: match the disc diameter to your grinder and stay within the RPM rating.
18V XR Cordless Grinders
DeWalt’s 18V XR platform is its mainstream cordless range. Its 18V XR grinders use the same batteries as DeWalt’s other 18V XR tools.

DCG405N (125mm) — 18V XR Brushless
The DCG405N is a brushless 18V XR 125mm grinder (DeWalt UK DCG405N-XJ, 9,000 RPM).
- Disc size: 125mm (5 inches)
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- Max RPM: 9,000
- Battery: 18V XR (sold separately on the N version; DeWalt UK also sells the DCG405P2 kit with two 5Ah DCB184 packs)
- Power: Brushless motor for efficiency
- Compatible discs: Any 125mm disc with a 22.23mm bore rated for at least 9,000 RPM
Best for: Cutting and grinding metal, light masonry work, edge finishing. The compact size makes it ideal for tight spaces and overhead work.
Battery note: The DCG405N’s runtime depends on battery capacity and the work; a higher-capacity battery runs longer. See our 18V XR battery guide for detailed recommendations.
DCG412N (125mm) — Older 18V XR Model
The DCG412N is an older 18V XR 125mm grinder with no current DeWalt UK product page. DeWalt’s manual gives 8,000 RPM, lower than the DCG405N’s 9,000 RPM.
- Disc size: 125mm
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- Max RPM: 8,000
- Battery: 18V XR
- Compatible discs: Any 125mm disc with a 22.23mm bore rated for at least 8,000 RPM
Upgrade path: If you own a DCG412N and batteries are failing, upgrading to the newer DCG405N is seamless—same battery platform, same disc compatibility.
54V XR FlexVolt Cordless Grinders
DeWalt’s 54V XR FLEXVOLT platform is its higher-voltage cordless system. FLEXVOLT batteries also run DeWalt’s 18V XR tools, switching voltage automatically.
DCG418NT (125mm) — 54V FlexVolt Powerhouse
The DCG418NT is a 125mm 54V XR FLEXVOLT grinder. It takes one FLEXVOLT battery pack, which slides into the handle (DeWalt UK manual). DeWalt UK also sells it in kits with 6Ah or 9Ah FLEXVOLT packs.
- Disc size: 125mm
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- Max RPM: 9,000
- Battery: one 54V XR FLEXVOLT pack, such as the DCB546 6.0Ah or DCB547 9.0Ah (sold separately on the NT version)
- Power: 2,300W max power output (DeWalt UK manual)
- Compatible discs: Any 125mm disc with a 22.23mm bore rated for at least 9,000 RPM
Best for: professional metalworking, fabrication and stainless steel cutting, especially if you already have FLEXVOLT batteries for other tools.
Disc note: the DCG418NT and DCG405N take the same discs (125mm, 22.23mm bore, rated for at least 9,000 RPM).
DCG460N (230mm) — 54V FlexVolt Large Disc
The DCG460N is DeWalt’s cordless 230mm grinder. It takes one 54V XR FLEXVOLT battery pack, which slides into the handle (DeWalt manual).
- Disc size: 230mm (9 inches)
- Spindle / disc bore: 22.23mm disc bore (DeWalt’s UK page does not state the spindle thread)
- Max RPM: 6,000
- Battery: one 54V XR FLEXVOLT pack (DeWalt UK also sells the DCG460X2 kit with two 9Ah DCB547 packs)
- Power: over 3,000 MWO (DeWalt UK product description)
- Compatible discs: Any 230mm disc with a 22.23mm bore rated for at least 6,000 RPM
Cordless 230mm: no mains cable to manage on large jobs. Runtime depends on the battery and the work, so keep a spare charged pack if you need to keep going.
Large disc safety: 230mm discs generate high torque. Always wear a full face shield, ensure guards are correctly positioned, use both hands, and brace yourself for kickback. Check the clamping flange for damage before each use.
Corded Grinders
DeWalt’s corded angle grinders are traditional, reliable, and deliver consistent mains-powered performance. No battery dependency, ideal for stationary workshop use or extended job-site deployments.
DWE4206 (115mm)
A compact 115mm corded grinder—lightweight, single-handed, and quick for detail work. Often overlooked in favour of cordless, but excellent value.
- Disc size: 115mm (4.5 inches)
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- Max RPM: 11,000
- Power: 1,010W (UK 110V DWE4206-LX)
- Compatible discs: Any 115mm disc with a 22.23mm bore rated for at least 11,000 RPM
Best for: Finishing work, precision cutting, edge grinding, detail metalworking. The high RPM is excellent for thin cuts and flap disc finishing.
DWE4257 (125mm)
DeWalt’s mid-range corded 125mm grinder. Solid choice for workshop use, fabrication, and trade work where extended runtime is essential.
- Disc size: 125mm
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- Max RPM: 2,800–10,000 (variable)
- Power: 1500W
- Compatible discs: Any 125mm disc with a 22.23mm bore rated for at least 10,000 RPM
Workshop standard: The DWE4257 is a workhorse in small workshops. No battery anxiety, consistent power, and ready whenever you need it.
DeWalt-Branded Discs vs Third-Party Alternatives
DeWalt sells their own range of grinding and cutting discs, typically available through major tool retailers and online. Should you buy DeWalt-branded?
Pros of DeWalt-branded discs:
- Made by DeWalt for its own grinders (still check the size and RPM rating)
- Marked with a maximum RPM, like any compliant disc
- Convenient multipacks reduce reorder frequency
- Available at most UK tool retailers
Cons:
- Premium pricing compared to independent brands
- Fewer specialist disc types (e.g., stone-specific, masonry) than Norton or Silverline
Third-party discs fit and can be used as long as they are:
- The correct diameter (115mm, 125mm, or 230mm)
- 22.23mm bore (to fit the grinder’s spindle)
- Rated for your grinder’s maximum RPM or higher
- From an established manufacturer (Norton, Silverline, Draper, Makita)
My recommendation: Buy third-party discs from brands like Silverline or Norton for cutting work (better value), and DeWalt-branded if you want guaranteed matching with your grinder’s exact specifications.
Best Discs for DeWalt Angle Grinders
Best 115mm Cutting Discs for DeWalt DWE4206
Silverline 10-Pack 115mm Metal Cutting Discs
- 22.23mm bore
- Check the disc label: it must be rated for at least your grinder’s speed (11,000 RPM on the DWE4206)
- Clean, precise cuts on steel and aluminium
- ~£0.60 per disc
Norton Expert Metal Cutting Discs 115mm
- Premium cutting performance
- Check the disc label: it must be rated for at least your grinder’s speed
- Excellent for stainless steel and tough materials
- ~£0.85 per disc
Best 125mm Cutting Discs for DeWalt (DCG405N, DCG418NT, DWE4257)
Silverline 10-Pack 125mm Metal Cutting Discs
- 22.23mm bore
- Check the disc label: it must be rated for at least your grinder’s speed (up to 10,000 RPM on the DWE4257)
- Fast, clean cuts on ferrous and non-ferrous metals
- ~£0.70 per disc
Draper Expert 125mm Metal Cutting Discs (5-Pack)
- UK-made, premium quality assured
- Check the disc label: it must be rated for at least your grinder’s speed
- Slightly higher cost but superior longevity
- ~£1.10 per disc
Best 230mm Cutting Discs for DeWalt DCG460N
Silverline 230mm Metal Cutting Discs (5-Pack)
- 22.23mm bore; must be rated for at least 6,000 RPM (the DCG460N’s speed)
- Heavy-duty construction for extended cuts
- ~£2.50 per disc
Norton Expert 230mm Metal Cutting Discs
- Premium choice for professional 230mm work
- Must be rated for at least 6,000 RPM (the DCG460N’s speed)
- Excellent for high-volume fabrication
- ~£3.20 per disc
Best Flap Discs for DeWalt Grinders (All Sizes)
Silverline 115mm Flap Discs (10-Pack, 60 Grit)
- For DWE4206, ideal for grinding and finishing
- Check the disc label: it must be rated for at least your grinder’s speed
- ~£0.50 per disc
Silverline 125mm Flap Discs (10-Pack, 60 Grit)
- Works on DCG405N, DCG418NT, DWE4257
- Check the disc label: it must be rated for at least your grinder’s speed (up to 10,000 RPM on the DWE4257)
- Excellent for stock removal and surface preparation
- ~£0.60 per disc
Watch: Video Guide
Frequently Asked Questions (FAQ)
What disc fits the DeWalt DCG405N?
The DeWalt DCG405N accepts 125mm discs with a 22.23mm bore (it has an M14 spindle) and a maximum RPM rating of at least 9,000. Compatible disc types include cutting discs, flap discs, grinding wheels, and stone cutting discs. Any disc that meets these specifications—whether DeWalt-branded, Silverline, Norton, or Makita—will fit the DCG405N.
Is the DeWalt DCG418NT worth upgrading from the DCG405N?
The DCG418NT (54V FLEXVOLT) and DCG405N (18V XR) take the same discs (125mm, 22.23mm bore, rated for at least 9,000 RPM). DeWalt says the DCG418 has up to 30% more power with a 9Ah battery than its DCG414; we have not compared it with the DCG405N. Consider it if (1) you already own FLEXVOLT batteries for other tools or (2) you do heavy-duty cutting or fabrication. For light DIY use, the DCG405N may be enough. The choice depends on your existing tools and workload.
Can I use Makita or Bosch discs on a DeWalt angle grinder?
Yes. UK DeWalt and Makita grinders, and Bosch’s conventional (non-X-LOCK) grinders, have an M14 spindle and take discs with a 22.23mm bore. A Makita 125mm disc with a 22.23mm bore and an RPM rating at or above your grinder’s speed will fit a DeWalt 125mm grinder with an M14 spindle. Check: (1) disc diameter (115mm, 125mm, 230mm), (2) the 22.23mm bore, and (3) RPM rating meets or exceeds your grinder’s maximum. Brand is irrelevant—compatibility is determined by these specs alone.
What’s the advantage of the cordless DeWalt DCG460N 230mm over a corded grinder?
The DCG460N 230mm cordless delivers mobility without mains cable constraints—ideal for site work, outdoor locations, and jobs where cable routing is difficult. Corded grinders offer unlimited runtime (no battery swap). Choose cordless if you prioritise portability and already own FlexVolt batteries; choose corded if you work stationary and want zero downtime. Both take 230mm discs with a 22.23mm bore; the disc must be rated for at least the grinder’s speed (6,000 RPM on the DCG460N).
Summary: DeWalt Angle Grinder Disc Compatibility
The DeWalt angle grinders on this page—18V XR, 54V FlexVolt and corded—take discs with a 22.23mm bore. This makes compatibility straightforward. Whether you own a compact DCG405N or the powerful 230mm DCG460N, you can buy discs from any reputable manufacturer by matching:
- Disc diameter: 115mm, 125mm, or 230mm
- Spindle / disc bore: M14 spindle, 22.23mm disc bore
- RPM rating: Equal to or higher than your grinder’s maximum RPM
DeWalt-branded discs offer guaranteed compatibility; Silverline and Norton are alternatives that fit if they meet the same specifications. Stock a mix of cutting and flap discs, and you’ll be equipped for any cutting or grinding task.
How we compile this guide
We cross-reference compatibility details against manufacturer specifications where available, official tool manuals, and the physical standards that govern fitment (bore sizes, arbor diameters, voltage platforms, connector types). We prioritise primary sources over retailer listings, flag anything we can’t confirm, and re-verify the data on a regular cycle. Where we give a buying recommendation, we tell you the reasoning — not just the link. More on our method →



