Quick Specs
What Battery Does the Milwaukee 2713-20 Use?
The Milwaukee 2713-20 M18 FUEL 1″ SDS Plus D-Handle Rotary Hammer runs on the Milwaukee M18 18V battery platform. Any Milwaukee M18 REDLITHIUM battery will power this tool, though high-output batteries are essential for concrete drilling performance.
About the Milwaukee 2713-20
The Milwaukee 2713-20 is an SDS Plus rotary hammer delivering 2.1 ft-lbs of impact energy at 1,400 RPM and 4,900 BPM. It features three modes — hammer drill, rotation only, and hammer only — making it suitable for drilling into concrete and masonry, driving ground rods, and light chiselling work. The anti-vibration system reduces user fatigue during extended overhead or horizontal drilling sessions.
Compatible Batteries
| Battery Model | Capacity | Weight | Best For |
|---|---|---|---|
| 48-11-1815 | 1.5Ah | 0.75 lb | Not recommended for this tool |
| 48-11-1820 | 2.0Ah | 0.81 lb | Not recommended for this tool |
| 48-11-1830 | 3.0Ah | 1.06 lb | A few holes in concrete |
| 48-11-1840 | 4.0Ah | 1.25 lb | Light concrete drilling |
| 48-11-1850 | 5.0Ah | 1.5 lb | Good for regular drilling |
| 48-11-1860 | 6.0Ah | 1.56 lb | Best for sustained concrete work |
Recommended SDS Drill Bits
As an Amazon Associate we earn from qualifying purchases. Check fitment & current price on Amazon.
Recommended Battery
For the 2713-20, the 48-11-1860 (6.0Ah) High Output battery is the best choice. Rotary hammers demand high sustained current for impact energy, and the 6.0Ah High Output pack delivers consistent performance hole after hole. For jobs requiring many anchor holes in concrete — such as electrical or plumbing rough-in — the extra capacity is essential.
Minimum Battery
The 48-11-1840 (4.0Ah) is the practical minimum for the 2713-20. Compact batteries will technically run the tool, but impact energy and drilling speed may suffer under load. For drilling a few Tapcon holes or anchors, a 4.0Ah works — for anything more, use a 5.0Ah or 6.0Ah pack.
Battery Compatibility Notes
- All M18 REDLITHIUM batteries are backwards and forwards compatible with every M18 tool
- High Output batteries are critical for rotary hammers — they deliver the sustained current needed for consistent impact energy
- M18 batteries are NOT compatible with M12 tools or older V18 tools
- The anti-vibration system works with any battery — no special battery required for this feature
Related Resources
- Milwaukee 48-11-1850 Battery Details
- Milwaukee 48-11-1860 Battery Details
- Milwaukee M18 Battery Compatibility Guide
- Battery Compatibility FAQ
Battery sizing, runtime & troubleshooting
Recommended pack: Run a 5.0Ah XC or a HIGH OUTPUT pack for sustained drilling. Compact CP packs are not advised — they cut out under load and run hot.
Compatibility caveats: All M18 packs physically fit, but a compact pack limits performance; a HIGH OUTPUT pack gives the most consistent hammer energy (a benefit, not a stated requirement).
If it won’t start or cuts out: Cutting out while drilling concrete is the classic “pack too small” symptom — the BMS trips under current. Move up to a 5.0Ah or HIGH OUTPUT pack.
Runtime: No per-charge figure is published; Milwaukee describes all-day capability on high-capacity packs.
Versus the adjacent model: It draws harder than the impact-class tools here — treat it like the grinder and circular saw and give it your biggest pack.
Where to Buy
Ready to add the Milwaukee 2713-20 to your toolkit? Check current prices and availability:
As an Amazon Associate, we may earn from qualifying purchases. This doesn’t affect the price you pay.